Provides a direct mW power read-out for a variety of lasers. This portable unit can for used for field testing and repair of DVD, VCD, CD, MD (mini disk) players and laser pointers. An analog display, tripod back and a 3’corded sensor, enable calibration and adjustment of lasers in research labs. Switch between 3 factory-calibrated, and frequently used wavelengths (635, 650, and 830 nm) or measure any wavelength in between against a known standard.

Comes ready to use with instructions, batteries and a hard carrying case.

Weight: 10 oz (280 g).

Dim: 5-1/2”x 3-1/2”x1-1/2” (141 x 88 x 35mm).

These tiny meters are less than 3/4” thick, weigh only 4oz (120g) and are easily carried in a shirt pocket. The controls, display and sensor are all neatly contained and protected within the folding case. Directions are printed right inside the cover. When open, the sensor may be extended for remote use or snaps into a fixed position atop the case. All units feature a bar graph display, auto power off, hold functions and indicate low battery and over range. Powered by 2 button cell batteries (included). Meter Dimensions: 7” x 3” x 3/4” (177 x 76 x 18mm).