Incubator /Refrigerator

It is the ultimate in flexibility when refrigerating or incubating specimens and other temperature sensitive
materials. Accurately holds temperatures from 5C to 65C. Great for all general incubation needs, or can be
used with 12 volt adapter to store or transport heated or refrigerated samples with laboratory convenience while working in
the field.
　

Product Specifications:
Precision: Internal temperature uniformity ±0.5C
Display: 3 digit, 0.1 resolution
Temperature controller: Digital microcomputer
Power requirements: 110-220 VAC, 60 Hz or 12 VDC, 65 watts
Net weight: 8.5 kg (18.7 lb.)
Capacity: 19 liter (.67 cu. ft.)
Outside dimensions: 38.8 cm wide x 28cm tall x 48.3cm deep (14.5"x11"x19")
Inside dimensions: 31.7cm wide x 19cm tall x 31.7cm deep (12.5"x7.5"x12.5")
Shelves: 2 removable metal shelves with plastic liners
Temperature range, cooling: 5C to ambient
Temperature range, heating Ambient to 65C


Product Features:

Digital display

Simple two button operation.

Clear instructions printed on front label.
Manually calibrate temperature to conform to your laboratory needs

No need for fragile thermometers
A digital microcomputer provides display accuracy and temperature uniformity of ±0.5C.
A brushless DC computer type fan assures thousands of hours of quiet, vibration free operation

In case of power outages, the thick urethane foam and rubber door gasket will keep samples insulated.
Settings are automatically stored in case of power failure.
Stackable: Simply stack one on top of another to save on scarce bench space.
Durability: Rugged ABS cabinet is resistant to dents, cracks and chemical attack.
Portability: Compact size measures 38.8 cm wide x 28cm tall x 48.3cm deep (14.5"x11"x19"). Weight approx. 8.5 kg (18.7 lbs)

Will operate on 12 VDC (cigarette lighter adapter) for important field work.
Large 19 liters (0.67 cu. ft) capacity, interior measures 31.7cm wide x 19cm tall x 31.7cm deep (12.5"x7.5"x12.5").
Low voltage circuit powered by UL and CE recognized power supply virtually eliminate shock or fire hazard.
　

High Low Temperature Incubator with Programmable or Non-programmable Controls

From 4.0 C to 70.0 Deg. C in 27.5 Liter or 55 Liter Volume Units with Precise Control— Even at Ambient

Incubators Features

• Peltier based. No compressors, no CFC's. Energy efficient.
• Temperature range from 4.0 C to 70.0 C
• FULLY PROGRAMMABLE or non-programmable controls
• 27.5 or 55 liter volumes
• Timer with alarm and auto-off
• Electronic calibration and power failure protection
• RS232 interface
• UL, CSA, and CE listed

Some Applications

• Protein crystal growth
• BOD'S
• Culture growth above, below or at ambient
• Enzyme reactions and deactivations
• Incubating marine cultures below ambient
• Ligations at 14.0 C to 16.0 C
• Hybridizations
• Storing Oocytes at 17.0 C
• Storing DNA libraries
　

Product Description:

The models IN30 and IN40 are not programmable. The models IN35 and IN45 are fully programmable. The IN30 and IN40 have a 5/8" liquid crystal display that reads temperature to 0.1 C. The display can be changed from temperature to timer by a single key stroke. The timer reads in hours, minutes and seconds. When the timer counts down to zero it sounds an audible alarm. The timer is settable to 100 hours maximum. In addition, timers have a user settable Auto-Off which turns the heater/chiller off at zero time. The keyboard is tactile touch with audible feedback and has UP Arrow, DOWN Arrow, TEMP, TIMER and AUTO-OFF keys.

The models IN35 and IN45 are fully programmable by the user through the keyboard. The units can store three routines in memory for instant recall and use at any time. Each program has ten steps where each step is a temperature target, temperature ramp (if desired), and a run time. Steps can be set for running multiple "ramp and soak" cycles, or for just running at one temperature for a given time and then switching automatically to another temperature for another given time. At the end of each step is a "cycle" step which can be set to repeat the prior steps one to nine times. The IN35 and IN45 also can be used in the non-programmable mode as a normal incubator.

The display on the IN35 and IN45 is a two-line alphanumeric type with sixteen characters per line. The display shows target temperature and actual temperature to 0.1 C, ramp rate in C/hour, and timer in days, hours, minutes, and seconds to 99 days maximum.

All models have several safety features such as a watchdog circuit to monitor the microprocessor, and power interrupt protection that resets the units to what they were doing before power failed after power returns.

The chamber of the IN30 and IN35 is 12" high by 10" deep by 14" side to side. The units are supplied with two racks adjustable to four different levels. The chamber of the IN40 and IN45 are 24" high by 10" deep by 14" side to side. These units are supplied with four racks adjustable to six different levels. The racks are electro-polished steel. The chambers on all units are seamless, molded white ABS plastic, and very easy to clean. All units have an inner and outer door. The inner door is clear plastic for sample viewing while minimally upsetting the chamber temperature.

All units have a painted aluminum chassis with plastic front panel and door. They come complete with three-wire grounded, detachable AC line cord, racks, and instruction manual. The high and neutral lines are fused and switched for safety. They are all available in 100, 115, and 230VAC, 50/60 Hz versions.

Product Specification: