Digital Handheld or Benchtop Viscometers

Caution for protection of the viscometer
　

• It is not water-resistant, moisture resistant or of a hermetic structure.

• Prevent intrusion of a measuring liquid or detergent into the main body.

• Do not use in a place of high humidity and corrosive atmosphere.

Benchtop stand and mounting

^{Model ST-2001 Series Viscometer}

Features:

• Direct reading of results and measuring parameters
  on a L.C.D. display.

• Indicated parameters:
  - Selected speed: . . . . . . . . . . . . . . . . . . . .r.p.m.
  - Selected spindle: . . . . . . . . . . . . . . . . . . . . .S.P.
  - Viscosity result: . . . . . . . . . . . . . . . . .cP (mPa-s)
  - Base scale percentage: . . . . . . . . . . . . . . . . . .%

• The equipment determines the absolute relative
  viscosity.

• Selection of data in S.I. or C.G.S.

• Automatically checks for correct operation by scanning at different speeds.

• A visual and audible alarm indicate if an error has been detected.

• Out of range measurements are indicated by an audible and visual signal.

• The unit is protected against any brusque increases in mains power.

• User calibration.

• 18 selectable speeds from 0.3 to 200 r.p.m.
  　

Technical Data:

• Direct results in cP(mPa-s): models ST-2001 L & R.

• Direct results in Poise (Pa-s): model ST-2001 H.

• Precision: ±1% base scale.

• Resolution:
  - Using low viscosity adapter: 0.01.
  - For viscosity below 10,000 cP: 0.1.
  - For viscosity equal to or above10,000 cP: 1.
  Repeatability: 0.2%.

• Power to all three models: 100 to 240 VAC at 50/60 Hz. Comes complete with support for 4 or 6 spindles, model dependent, cover, adjustable base, instruction manual and spindle selection table

Accessories:

• Spindle R 1

• Protectors for spindles

• Small sample volume adapters

• Set of 3 or 4 spindles, model dependent

• Low viscosity adapters

• Displacement spiral adapter

• Electronic temperature controller ST-TEMP

• Oil standards