Ultrasonic Thickness Testing

@

Model 8811 Ultrasonic Thickness Meter

Model 100 Ultrasonic Thickness Gauge

Model 300 Ultrasonic Thickness Gauge

@

@

@

@

ETC-8811 Thickness Meter

FEATURES:

  • Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement & fast measuring time.

  • Wide measuring range and high resolution.

  • Digital display gives exact reading with no guessing or errors.

  • With high power power emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies. That takes it easy to measure the rough surface, even cast iron. It is widely used I almost all kinds of industries.

  • Applicable too measure the thickness on many materials, e.g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron.

  • Automatic power off to conserve power.

Applications: used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.. in industries of petroleum, shipbuilding, power station and machine manufacture, etc...

SPECIFICATIONS:
@

Display

4 digits, 10mm LCD

Range

1.5 V 200mm (45# steel)

Resolution

0.1mm / 0.001 inch

Accuracy

+/- (0.5%n+0.1)

Sound velocity

500 V 9000m/s

Power supply

4 x 1.5V AAA (UM-4) battery

Operating condition

Temp. 0-50 deg.C, Humidity <80%

Size

160 x 68 x 32mm (5.5 x 2.8 x 1.2 inch)

Weight

About 208g (not including batteries)

Accessory

Carrying case, Operating manual, Ultrasonic sensor

@

@

MATERIAL SELECTION
@

No.

CODE

MATERIAL

1

cd01

Steel

2

cd02

Cast iron

3

cd03

Aluminum

4

cd04

Red copper

5

cd05

Brass

6

cd06

Zinc

7

cd07

Quartz glass

8

cd08

Polyethylene

9

cd09

PVC

10

cd10

Gray cast iron

11

cd11

Nodular cast iron

12

xxxx

Sound velocity


@

Back to top


Model 100 Ultrasonic Thickness Gauges

Model 100 is a hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminum, titanium, plastics, ceramics, glass and other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. With uses in many areas of industry 100 can perform precise measurements on various types of raw materials, components parts, and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion.

@

extremely easy to use, after a simple calibration to a known thickness or sound velocity, the gauge will give accurate readings in millimeters . Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory

@

Features:

  • easy to operate

  • suitable for metal, glass, plastic & more

  • sound velocity up to 9999 m/s

  • clear 4 digital LCD display

  • resolution 0.1mm

  • memory for 10 readings

  • 5 preset sound velocity

Specification:

@

Display type:

4-digit LCD

Minimum display unit:

0.1mm

Measuring range:

1.0 mm- 225.0mm (in steel with standard probe)

Lower limit steel pipes:

minimum dia. 20mm x 3mm

Display resolution:   

0.1mm

Sound velocity range: 1000-9999m/s
Operating temperature: -10XC to +40XC
Frequency: 5MHz
Update rate:

2Hz

Power supply:

1.5V AA alkaline cells(2pcs)

Battery life: 

250 hours with one battery set

Dimensions:

1266823mm

@

Back to top


Model 300 Ultrasonic Thickness Gauges

  • Easy operation and accurate measurement on various ultrasonic wave well-conductive materials

  • Bigger display with adjustable contrast, Backlight on/off switch

  • Selectable display resolution: 0.1mm /0.01mm.

  • Memory for 500 measured values.

  • RS232 interface.

  • TA210 Printer connectable

    @

Standard delivery

  • Main unit

  • Transducer

  • 5MHz

  • Batteries AA (2 PCS)

  • Ultrasonic coupling

  • Rubber jacket

  • Manual

  • Carrying case

Specification:

@

Back to top

@


Excellent Technology Co.
Hong Kong: Tel. (852) 2691 3821    Fax. (852) 2900 2980
Email: LabSupplyhk@Gmail.com

China: Tel. (86) 150 1799 2655   Fax. (86) 755 3360 9662
Email: etchk.China@Gmail.com