Infusion Pumps

Model 100

Model 101

Model 200

Model 220

Model 250

@

Infusion / Withdrawal Pumps

Model 210

Model 230

Model 310

@

Push - Pull Pump

Model 120

Model 270

Model 260

@

Micro Emulsion Making Pump

Model 330

@

@

@

@

Model 100

A basic single syringe, infusion pump which combines precision with simplicity.

Features

  • Single syringe 10 ml to 60 ml, any manufacturer
  • Simple menu-driven setup:
    • select syringe size  from displayed table
    • set dispense volume
    • set dispense flow rate
  • Easy to read bright, backlight display
  • Dispense volume displayed and has automatic shutoff at completion
  • Volume and flow rate units (ml/hr or ml/hr) are selected automatically based on syringe size
  • Last settings stored in permanent memory
  • Button release of drive nut for easy syringe installation
  • Choice of run / stop after a power interruption

Specifications

Pump Type Infusion
Max. No. of  Syringes One
Syringe Size 10 ml to 60 ml
Dimensions 9 x 6 x 5 in.
23 x 15 x 12 cm
Weight 4.5 lb (2 kg)
Linear Force 20 lb (9 kg) min.

Advance Per Microstep

0.529 micron (1/2 step)
Max Step Rate (1/2 Step) 400 steps/sec
Min Step Rate 1 step / 30 sec.
Accuracy .  < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.1 ml/h

126 ml/h

25 ml

0.2 ml /h

318 ml/h

50 ml

0.2 ml/h

625 ml/h

100 ml

1.0 ml /h

1274 ml/h

250 ml

2.0 ml/h

3164 ml/h

500 ml

3.0 ml /h

6359 ml/h

1 ml

0.01 ml/h

13.2 ml/h

2.5  ml

0.02  ml/h

31.7 ml/h

3 ml

0.03 ml/h

44.9 ml/h

5 ml

0.03  ml/h

87.0 ml/h

10 ml

0.1 ml/h

127 ml/h

20 ml

0.1  ml/h

219 ml/h

30 ml

0.1  ml/h

282 ml/h

60 ml

0.2  ml/h

519 ml/h

back to top


Model 101

Our dual-syringe infusion pump is ideal for microdialysis and similar applications which require virtually pulseless flow at very low flow rates

Features

  • Hold 2 syringes, 10 µl to 10 ml each or, a single syringe up to 60 ml
  • Simple menu prompt setup:
    • select syringe size  from displayed table
    • set dispense volume
    • set dispense flow rate
  • Easy to read bright, backlight display
  • Dispense volume displayed and has automatic shutoff at completion
  • Volume and flow rate units (ml/min or ml/min) are selected automatically based on syringe size
  • Last settings stored in permanent memory
  • Button release of drive nut for easy syringe installation
  • Choice of run / stop after a power interruption

Specifications

Pump Type Infusion
Max. No. of  Syringes Two (up to 10 ml)
Syringe Size 10ul - 10ml ( two syr)
10ul - 60ml ( one syr)
Dimensions 9 x 6 x 5 in.
23 x 15 x 12 cm
Weight 4.5 lb (2 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep    

0.088 micron (1/2 step)
Max Step Rate (1/2 Step) 400 steps/sec
Min Step Rate 1 step / 30 sec.
Accuracy   < 1%
Reproducibility   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

0.382 ml/min

25 ml

0.001 ml/h

0.884 ml/min

50 ml

0.001 ml/h

1.762 ml/min

100 ml

0.001 ml/h

3.542 ml/min

250 ml

0.01 ml/h

8.78 ml/min

500 ml

0.01 ml/h

17.65 ml/min

1 ml

0.1 ml/h

35.2 ml/min

3  ml

0.1 ml/h

122.5 ml/min

5 ml

0.1 ml/h

176.2 ml/min

10 ml

0.001  ml/h

0.351 ml/min

20 ml

0.001 ml/h

0.602ml/min

30 ml

0.001  ml/h

0.773 ml/min

60 ml

0.001  ml/h

1.175 ml/min

back to top


Model 200

Two-Syringe Infusion Pump  This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application

Features

  • Holds one or two syringes, 10 ml to 140 ml each
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free manual adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Choice of unit selection
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Last settings stored in permanent memory
  • Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Optional multi-step keypad programmable feature (Model 200P)

Specifications

Pump Type Infusion
Max. No. of  Syringes Two
Syringe Size 10 ml to 140 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 15 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1 step 1/100 sec
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml /h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml /h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml /h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml /h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml /h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml /h

46.49 ml/min

60 ml

0.001 ml/h

86 ml/min

140 ml

0.001 ml /h

145 ml/min

back to top


Model 220

Model 220 Multi-Syringe Infusion Pump Ideal for applications requiring multiple syringes, the Model 220.  Each has been modified to hold up to 10 syringes.

Features

  • Multiple syringe holder:
    • One to ten syringes, 10 ml - 10 ml
    • One to six syringes, 20 ml - 60 ml
    • One to four syringes, 100 ml - 140 ml
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Optional multi-step keypad programmable feature  (Model 220P)

Specifications

Pump Type:

Infusion

Max. No. of  Syringes Ten
Syringe Size One to ten syringes,
10
µl to 10 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 14 cm
Weight 9.5  lb (4.3 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1/100 sec  
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml /h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml /h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml /h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml /h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml /h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml /h

46.49 ml/min

60 ml

0.001 ml/h

70.57  ml/min

140 ml

0.001 ml /h

147 ml/min

back to top


Model 250

Four-Syringe Microdialysis Infusion Pump.  Each syringe can be sized differently and is clamped independently. 

Features

  • Multiple syringe holder
    • Four syringes, 10 ml to 10 ml each
    • Separate clamping accommodates different sizes
    • Syringes may be positioned independently for sequential dispensing by the pusher block.
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS-232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Optional multi-step keypad programmable feature (KDS250P)

Specifications

Pump Type: Infusion
Max. No. of  Syringes Four (Each syringe can be a different size)
Syringe Size 10 ml to 10 ml
Dimensions 11 x 9 x 6 in.
28 x 23 x 15 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1/100 sec. 
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml /h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml /h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml /h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml /h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml /h

20.91 ml/min

back to top


Model 210

The Model 210 offers you more advanced features than any other infusion / withdrawal pump in its price range -- including five operating modes plus independent rate and volume settings for both infusion and withdrawal.

Features

  • Holds two syringes, 10 ml to 140 ml each
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Independent rate and volume settings for infusion and withdrawal
  • Multiple mode selection:
    • Infusion
    • Withdrawal
    • Infusion then withdrawal
    • Withdrawal then infusion
    • Continuous cycle
  • Optional multi-step keypad programmable feature (Model 210P)

Specifications

Pump Type Infusion/Withdrawal
Max. No. of  Syringes Two
Syringe Size 10 ml to 140 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 14 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1 step / 100 sec.
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml/h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml/h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml/h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml/h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml/h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml/h

46.49 ml/min

60 ml

0.001 ml/h

86 ml/min

140 ml

0.001 ml/h

145 ml/min

back to top


Model 230

Ideal for applications requiring multiple syringes, the Model 230 is  an adaptation of the Model 210.  The pump has been modified to hold up to 10 syringes.

Features

  • Multiple syringe holder:
    • One to ten syringes, 10 ml - 10 ml
    • One to six syringes, 20 ml - 60 ml
    • One to four syringes, 100 ml - 140 ml
  • Withdrawal then infusion
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS-232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Independent rate and volume settings for infusion and withdrawal
  • Multiple mode selection:
    • Infusion
    • Withdrawal
    • Infusion then withdrawal
    • Withdrawal then infusion
    • Continuous cycle
  • Optional keypad programmable feature (Model 230P)

Specifications

Pump Type Infusion / Withdrawal
Max. No. of  Syringes One to ten syringes,
10 µl - 10 ml
Syringe Size 10 µl to 140 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 14 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1 step / 100 sec.
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml /h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml /h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml /h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml /h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml /h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml /h

46.49 ml/min

60 ml

0.001 ml/h

70.57  ml/min

140 ml

0.001 ml /h

147 ml/min

back to top


Model 310

The Model 310 Reversible Nano Pump is used exclusively with micro syringes.  Small size, remote control and  a rugged mounting arm make it ideal for use with micromanipulator, stereotaxic and other clamping devices.

The single syringe infusion/withdrawal pump consists of a controller and a remote pump head designed to use Hamilton microliter syringes and deliver nanoliter volumes at low flow rates.  The microprocessor based controller uses a bright display and membrane keypad with a simple, menu-prompt system for easy setup.  The pump features preset rate and volume control.   The dispense volume is displayed continuously and the pump shuts off automatically when the preset volume is dispensed.

Features

  • Mini size pump
  • 1 to 100 microliter syringe
  • Simple menu-driven setup with bright display and keypad
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
    • infusion or withdrawal
  • Dispense volume is displayed and has automatic shutoff at completion
  • Easy syringe loading with pusher block fast forward/fast reverse feature for rapid adjustments.
  • Last settings stored in memory

Specifications

@
Travel: 1/2 step= 6.35 microns with a 10 ml syringe
1/2 step= 1.1 nanoliter
Dimensions: Pump
16.5 x 3 x 4.5 cm (0.16 kg)

Controller
23 x 15.2 x 7.6 cm (2 kg)

Connection Cable
180 cm

Mounting Rod Diameter
0.32 in (8 mm)

Linear Force 1 lb

Flow Rates

Syringe

Minimum

Maximum

Volume

1 ml

0.01 ml/min

1.25 ml/min

0.001 ml

2 ml

0.01 ml /min

2.5 ml/min

0.001 ml

5 ml

0.01 ml/min

6.35  ml/min

0.001 ml

10 ml

0.01 ml /min

13.75  ml/min

0.001 ml

25 ml

0.03 ml/min

36.4 ml/min

0.01 ml

50 ml

0.1 ml /min

63.3  ml/min

0.01 ml

100 ml

0.1 ml/min

127.1 ml/min

0.01 ml

back to top


Model 120

Push-Pull Syringe Pump

This pump provides simultaneous infusion and withdrawal at the same rate with opposing syringes on the same drive screw.

Features

  • Holds two syringes 10 µl to 10 ml each
  • Simple menu-driven setup:
    • select syringe size  from displayed table
    • set dispense volume
    • set dispense flow rate
  • Easy to read bright, backlight display
  • Dispense volume displayed and has automatic shutoff at completion
  • Volume and flow rate units (ml/hr or ml/hr) are selected automatically based on syringe size
  • Last settings stored in permanent memory
  • Button release of drive nut for easy syringe installation
  • Choice of run / stop after a power interruption

Specifications

Pump Type: Push/Pull
Max. No. of  Syringes One + One
Syringe Size 10 ml to 15 ml
Dimensions 9 x 6 x 5 in.
23 x 15 x 14 cm
Weight 4.5 lb (2 kg)
Linear Force 20 lb (9 kg) min.

Advance Per Microstep

0.529 micron (1/2 step)
Max Step Rate (1/2 Step) 400 steps/sec
Min Step Rate 1 step / 30 sec.
Accuracy .  < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

@

Syringe

Minimum

Maximum

10 ml

0.1 ml/h

126 ml/h

25 ml

0.001 ml /h

0.884 ml/h

50 ml

0.2 ml/h

625 ml/h

100 ml

1.0 ml /h

1274 ml/h

250 ml

2.0 ml/h

3164 ml/h

500 ml

3.0 ml /h

6359 ml/h

1 ml

0.01 ml/h

13.2 ml/h

2.5  ml

0.02  ml/h

31.7 ml/h

3 ml

0.03 ml/h

44.9 ml/h

5 ml

0.03  ml/h

87.0 ml/h

10 ml

0.1 ml/h

125 ml/h

back to top


Model 270

Continuous Cycle Syringe Pump

The Model 270 can hold up to  four syringes and can cycle continuously back and forth in a push-pull action.  As two syringes are infusing, two syringes are withdrawing at the same rate.  At the end of the set volume the direction is automatically reversed and the next cycle begins.    With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense.

Features

  • Holds four syringes, 10 ml to 60 ml each, With larger syringes the full volume may not be useable. [60 ml syr - 40 ml useable, 30 ml  syr - full]
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control.

Specifications

@
Pump Type: Continous Flow
Max. No. of  Syringes Four
Syringe Size 10 ml to 60 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 14 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1 step / 100 sec.
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml /h

0.884 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml /h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml /h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml /h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml /h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml /h

86 ml/min

back to top


Model 260

Push-Pull Syringe Pumps

This KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive.  The Model 260 is an  adaption of the Model 210.  The pump  has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate.  The Push/Pull mode is designed for one cycle only.

Note: When not used in push/pull mode, the pump has all the features of model 210

Features

  • Holds up to four syringes, 10 ml to 60 ml each.  With large syringes, the full volume may not not be usable.
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free adjustment
  • Simple menu-driven setup:
    • select syringe size from displayed table
    • dispense volume
    • dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Choice of unit selection
  • Last settings stored in permanent memory
  • Built-in RS-232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Independent rate and volume settings for infusion and withdrawal
  • Multiple mode selection:
    • Withdrawal for push/pull
  • Optional multi-step keypad programmable feature (Model 260P)

Specifications

Pump Type: Push/Pull
Max. No. of  Syringes Two in each direction
Syringe Size 10 µl to 60 ml
Dimensions 11 x 9 x 5.5 in.
28 x 23 x 14 cm
Weight 9 lb (4 kg)
Linear Force 40 lb (18 kg)

Advance Per Microstep

0.165 micron (1/16 step)
Max Step Rate (1/2 Step) 1600/sec
Min Step Rate 1 step / 100 sec.
Accuracy   < 1%
Reproducability   0. 1%
Audible Alarm (Optional) **

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

22.98 ml/min

25 ml

0.001 ml/h

60.68 ml/min

50 ml

0.001 ml/h

105.8 ml/min

100 ml

0.001 ml/h

212.6 ml/min

250 ml

0.001 ml/h

527.6 ml/min

500 ml

0.001 ml/h

1.06 ml/min

1 ml

0.001 ml/h

2.203 ml/min

3  ml

0.001 ml/h

7.36 ml/min

5 ml

0.001 ml/h

14.33 ml/min

10 ml

0.001 ml/h

20.91 ml/min

20 ml

0.001 ml/h

36.19 ml/min

30 ml

0.001 ml/h

46.49 ml/min

60 ml

0.001 ml/h

86 ml/min

140 ml

0.001 ml/h

147 ml/min

back to top


Model 330

The model 330 is designed to emulsify viscous fluids/suspensions by forcing them back and forth through a micro-emulsifying needle.  The pump eliminates the fatigue and time required to manually prepare the emulsion.

The model 330 is ideal to prepare an adjuvant/antigen mixture to the correct viscosity ready for injection.

Features

The pump is based on the model 210 in continuous mode for cycling back and forth and is specifically designed for a 10 cc glass syringe and emulsion needle. [manufactured by Popper & Sons Inc. p/n 5127 and 7973 respectively]

  • Simple control using a keypad, menu selection and a LCD display
  • Volume setting and automatic cycling
  • Rate setting
  • Settings stored in memory
  • Stall detection

Specifications

Pump Type: Emulsifier Pump
Max. No. of  Syringes Two
Syringe Size 10 m
Dimensions 23 x 7.5 x 5.5 inch
58 x19 x 14 cm
Weight 16 lb (7.5 kg)
Linear Force 40 lb (18 kg) min.

Flow Rates

Syringe

Minimum

Maximum

10 ml

0.001 ml/h

20.9 ml/min

back to top

@


Excellent Technology Co.
Hong Kong: Tel. (852) 2691 3821    Fax. (852) 2900 2980
Email: LabSupplyhk@Gmail.com

China: Tel. (86) 150 1799 2655   Fax. (86) 755 3360 9662
Email: etchk.China@Gmail.com