HI-PE Multi Zone
High Performance Metal Detector

• Complete Security Detection

• Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit

• Very High Speed of Detection

• High Immunity to External Interferences

• Direct Selection of the International Security Standards

• High Reliability

• Local or Remote Programming with Networking Capabilities

Single & Multiple location

of the metal mass detected

The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.

A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.

The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

Main features

• Immediate selection of International Security Standards.
• Detection of magnetic, non-magnetic and mixed alloys metal weapons.
• High detection speed: up to 15 m/s (45 ft/s).
• Very high immunity to both electrical and mechanical interference.
• Programmable operation controlled by microprocessor.
• Programming: via built-in keypad and display or RS232/RS485 serial connection to Remote Control Unit (RCU), PC or computer network.
• Programming access protected by a mechanical lock and two alphanumeric passwords.
• Cable-free automatic synchronisation between two or more Metal Detectors at a minimum distance of 5 cm (2 inches) from each other.
• High-integration professional electronics and maximum reliability.
• Control unit incorporated into the detector.
• No need for initial or periodic calibration.
• Easy maintenance: modular control unit for a rapid replacement.
• Colour: light grey RAL 7040.

Installation Data

• Power Supply: 115 / 230 VAC, ±15%, 45-65 Hz, 30 VA MAX.
• External interface: RS-232C for connection to a Remote Control Unit (RCU), a terminal, a computer, an external modem or other CEIA Metal Detectors.
• Operating temperature: from -20°C to +70°C.
• Relative humidity: from 0 to 95% (without condensation).

Certification and Conformity

• Harmless to wearers of pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
• Conforms to the current International Security Standards for Walk-Through Metal Detectors.
• Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC).

Alarms

Visible Signals

• Multi-zone display bar for “height on person” localisation.
• High intensity display.
• Green and red metering signals proportional to the mass of the object detected.

Audible Signals

• High acoustic intensity alarm signal.
• Volume and tone of alarm signal can be programmed.

Options
Photocell transit counter and automatic alarm rate calculation	Outdoor version, waterproof degree IP65
Back up batteries with 45 minutes of independent operation
Accessories
Metal Detector Divesting Table	Metal test samples
External Main Battery & Supply Unit MBSU-1, including emergency batteries	Remote Control Unit CEIA RCU2
MD scope, software for oscilloscope simulation and terminal operation on CEIA Metal Detectors	Ethernet Network Controller for CEIA Metal Detectors

Classic Metal Detector

• High Level of Detection Uniformity

• Leading Edge Technology

• Easy to Install and Use

• Suitable for Portable Applications

• No Maintenance Required

• Affordable Pricing

Green and red metering signals proportional to the mass of the object detected

The Classic is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of public facilities such as schools, hotels, amusement parks and city halls.

The Classic Metal Detector combines the required Security with a high level of operating efficiency. The leading edge technology features a high flow rate of people through the gate with the minimum number of nuisance alarms, as personal effects such as coins, keys and belt buckles can pass through the magnetic field without causing an alarm.

The Classic Metal Detector is compact and lightweight, making this portable unit adaptable to any surroundings. The patented cylinder design is aesthetically suitable for the most discrete applications.

This security equipment does not require any special training for normal use, making this the most ‘user friendly walk-through Metal Detector in the industry.

CEIA Metal Detectors have been selected by the leading security agencies worldwide to protect highranking government officials. The Classic conforms to all International Security Standards and is capable of detecting both magnetic and non-magnetic weapons.

When security, operating efficiency and affordable pricing are required, the CEIA Classic Metal Detector is the obvious solution.

Main features

• Digitally adjustable sensitivity with a wide range of values.
• All functions are controlled by a microprocessor.
• Programming access protected by hardware key.
• Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables.
• Professional high integration and high reliability electronics.
• Control unit incorporated in the detector.
• No initial or periodic calibration.
• Easy maintenance. Modular control unit for a rapid replacement.
• Colour: light grey RAL 7040.

Installation Data

• Power Supply: 115 VAC (230 VAC available on request) +10/-20%, 45-65 Hz, 20 VA MAX.
• Operating temperature: from -20°C to +70°C
• Relative humidity: from 0 to 95% (without condensation).

Alarms

Visible Signals

• High intensity display.
• Green and red metering signals proportional to the mass of the object detected.

Audible Signals

• High acoustic intensity alarm signal.
• Volume and tone of alarm signal are programmable.

Certification and Conformity

• Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
• Conforms to the current International Security Standards for Walk Through Metal Detectors.
• Complies with EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC).

Accessories Metal Detector Divesting Table Metal test samples External Main Battery & Supply Unit MBSU-1, including emergency batteries Fastening Plates