Ion Meter

Brand : EcoScan
Country: Singapore

Eutech offers a wide selection of Ion Selective Electrodes (ISE) and meters for the measurement of ammonia, bromide, cadmium, calcium, carbon dioxide, carbonate, chloride, copper, cyanide, fluoride, iodide, lead, nitrate, potassium, silver, sulfide and sodium.

The ISE functions in the same principle as the pH electrode. The pH electrode is the most commonly used ISE that measures the activity of hydrogen activity in a solution. ISE responds to ionic activity or
concentration in a liquid because of the characteristics of the electrodes sensing membrane. Ideally, the ISE develops an electrical potential which is proportional to the activity or concentration of the ion for which the membrane is selective. For example, the fluoride electrode can be used to directly sense fluoride ion in drinking water.
@

EcoScan Ion 6


@
@
@

Product Features

:: Direct Ion Concentration for use with most mono- or di-valent Ion Selective Electrodes (ISE)
@ @
:: mV measurement mode allows you to check performance and calibration of your ISE
@ @
:: Multi-Point Calibration (up to 3 points) with Auto-Buffer Recognition - choice of USA, NIST or pure water buffer standards with 0.01 pH accuracy
@ @
:: Automatic Temperature Compensation (ATC) for the highest accuracy under fluctuating temperatures
@ @
:: Non-Volatile Memory ensures data are retained even meter powers off
@ @
:: Hold Function momentarily freezes reading for easy viewing and recording
@ @
:: Auto-Power Off saves battery power after non-use
@ @
:: Self-Diagnostic with message codes for easy troubleshooting
@ @
:: Large Custom LCD provides optimum viewing even at a distance
@ @
:: Protective Rubber Boot shields meter from accidental knocks and features a sturdy built-in stand for easy bench-top operation
@ @
:: Rugged Carrying Case (Optional) provides handy on-site meter calibration and measurement

@


@
@
EcoScan easy view

EcoScan carrying kit set

@

Applications

ISE: Use with any ISE with BNC connection; titration methods allow measurement of many other types of ions.

Water Quality Testing: For analyzing water in pools and spas, lithographic processes, boiler and cooling tower water analysis and all types of quality assurance and water quality testing.

Environmental/Agricultural: Use in ecology studies, aquariums, aquaculture and nutrients levels in hydroponics.

Educational: Ideal for quick, accurate checks in laboratories and schools.

Industrial/Laboratory: Use for fluoride in toothpaste production, water hardness testing or other ions in feed or wastewater, sewage treatment, soil testing, fertilizer testing, plant tissue testing, food processing (check sodium, potassium levels), geological testing, and metal plating. Also use in paper/pulp or pharmaceutical industries.

Specifications

Product Specification

Description
Ion Concentration Range 0.01 to 1999 ppm
Resolution & Accuracy 0.01 ppm (0.01 to 0.99 ppm); 0.1 ppm (1.0 to 199.9 ppm); 1 ppm (200 to 1999 ppm) & 1% Full Scale
mV Range 199.9 mV (extended); 500 mV
Resolution & Accuracy 0.1 mV & 0.2 mV (within 199.9 mV);
1 mV & 2 mV (beyond 200 mV)
pH Range 0.00 to 14.00 pH
Resolution & Accuracy 0.01 pH & 0.01 pH
Temperature Range 0 to 100.0 XC
Resolution & Accuracy 0.1 XC & 0.5 XC
No. of Ion Calibration Points Up to 4 points (min. 2 points)
No. of pH Calibration Points Up to 3 points
pH Buffer Options pH 4.01, 7.00, 10.01 (US);
pH 4.00, 6.86, 9.18 (NIST);
pH 4.10, 6.97 (Pure water)
Special Functions Auto Power-Off after 17 minutes;
Hold & Self-diagnostic messages
Power 4 'AAA' x 1.4V batteries

Order Information

Order No.

Item
EC-ION6/02K EcoScan Ion 6 Palmtop Ion/pH/mV Meter with pH electrode, temperature probe & EcoScan pH carry kit set (EC-ECOPH-KIT)
EC-ECOPH-KIT EcoScan pH Carry Kit Set V EcoScan Plastic Carry Case comprises: 1 x pH 4.01, pH 7.00, pH 10.01 buffer solutions (60 ml each) and 1 x empty
rinse water bottle
Laboratory Electrodes
Model
Applications
Concentration Range
Temperature/pH Range
Interferences
High purity power station water, fish tanks,
sea water, waste water, plating baths,
air/stack gases, and biological samples
Type: gas sensing
(0.01 to 17,000 ppm)
5 x 10-6 to 1.0 M

0 to 50XC /
above 11 pH

Volatile amines

Boiler feed water, natural water and fertilizers
Type: polymer membrane, epoxy combination

(0.01 to 18,000 ppm)
5 x 10-6 to 1.0 M

0 to 50XC /
4 to 10 pH

K+

Water, wine, plant tissue, and clinical analysis
Type: solid state, epoxy combination

(0.4 to 79,000 ppm)
5 x 10-6 to 1.0 M

0 to 80XC /
2 to 14 pH

S-2, I-, CN-, high
Cl- and NH3 levels

Plating baths
Type: solid state, epoxy combination

(0.01 to 11,200 ppm)
1 x 10-7 to 0.1 M

0 to 80XC /
2 to 12 pH

Ag+, Hg+2, Cu+2, high
Pb+2 and Fe+2 levels

Water softening systems, boiler feed water, drinking/mineral water, clinical analysis, and food applications
Type: polymer membrane, glass combination

(0.2 to 40,000 ppm)
5 x 10-6 to 1.0 M

0 to 50XC /
3 to 10 pH

Pb+2, Hg+2, Cu+2, Ni+2,Fe+2, Mg+2, Zn+2,Ba+2, K+2, K+, Na+

Soft drinks/carbonated beverages, wine, beer,
fermentation processes, bacterial cultures
Type: gas sensing

(4.4 to 440 ppm)
1 x 10-4 to 1 x 10-2 M

0 to 50XC /
4.8 to 5.2 pH

Volatile weak acids

River/tap water, plant tissue, soils, boiler feed water, clinical analysis, sweat, urine, cement, plating baths, and food samples
Type: solid state, epoxy combination

(1.8 to 35,500 ppm)
5 x 10-5 to 1.0 M

0 to 80XC /
2 to 12 pH

S-2, I-, CN-, Br, OH-, NH3, S2O3
-2,

Plating baths and water
Type: solid state, epoxy combination

(0.0006 to 6350 ppm)
1 x 10 -8 to 0.1 M

0 to 80XC /
2 to 12 pH

Ag+, Hg+2, high Cl-, Br-,
Fe+2 and Cd+2 levels

Plating baths, waste water and plant tissue
Type: solid state, epoxy combination

(0.13 to 260 ppm)
5 x 10-6 to 0.01 M

0 to 80XC /
11 to 13 pH

S-2, I-, Br-, Cl-

Drinking/
natural water, waste water, air/
stack gases, acids, sea water minerals, soils,
food, biological fluids, toothpaste/mouth
wash, coal, carbonated beverages, and bone
Type: solid state, epoxy combination

0.02 ppm to saturated
(1 x 10-6 M to saturated)

0 to 80XC /
5 to 8 pH

OH-

Milk, feeds, plants and pharmaceuticals
Type: solid state, epoxy combination

(0.006 to 127,000 ppm)
5 x 10-8 to 1.0 M

0 to 80XC /
0 to 14 pH

S-2, CN-, Br-, Cl-, NH3, S2O3
-2

Plating baths and organic compounds
Type: solid state, epoxy combination

(0.2 to 20,7000 ppm)
1 x 10-6 to 0.1 M

0 to 80XC /
3 to 8 pH

Ag+2, Hg+2, Cu+2, Cd+2 and Fe+2 levels

Surface/drinking water, sewage eff luent, soil extracts, fertilizers, plant tissue, meat,
potatoes, spinach, beets, baby food
Type: polymer membrane, epoxy combination

(0.5 to 62,000 ppm)
7 x 10-6 to 1.0 M

0 to 50XC /
2.5 to 11 pH

CIO4 -, I-, CN-, BF4 -

Waste water, river/tap water, clinical analysis,
saliva, serum, fertilizers, soils, and wines
Type: polymer membrane, epoxy combination

(0.04 to 39,000 ppm)
1 x 10-6 to 1.0 M

0 to 50XC /
2 to 12 pH

Cs+, NH4
+, Tl+, H+,
Ag+, Li+, Na+, Tris1+

Sewage eff luent, soils, sediments, plating baths and photographic fixing solution
Type: solid state, epoxy combination

(0.01 to 107,900 ppm Ag+)
(0.003 to 32,100 ppm S-2)
1 x 10-7 to 1.0 M (Ag+, S-2)

0 to 80XC /
2 to 12 pH

Hg+2

Steam condensates in power plants, clinical analysis, serum, foods, wine, glass, sea water, swimming pools, fish farms and aquariums
Type: glass membrane, glass combination

(0.02 ppm to saturated)
1 x 10-6 M to saturated

0 to 80XC /
5 to 12 pH

H+, K+, Li+, Ag+, NH4
+, Rb+, Cs+, Tl+

@

@


Excellent Technology Co.
Hong Kong: Tel. (852) 2691 3821    Fax. (852) 2900 2980
Email: LabSupplyhk@Gmail.com

China: Tel. (86) 150 1799 2655   Fax. (86) 755 3360 9662
Email: etchk.China@Gmail.com