Digital Force Tester Gauge Meter

economical FORCE GAUGEs SERIES MG

The Series MG Digital Force Gauge is an economical solution for push and pull testing of up to 500 lb. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Use the MG with a test stand and gripping fixtures to create a complete testing solution.

Series MG Force Gauge
  • Compatible with all Mark-10 test stands and grips.
  • Small size
  • Reversible aluminum housing for hand use or stand mounting
  • Peak memory for tensile and compressive loads
  • Programmable automatic shutoff
  • Programmable default configuration
  • Push-button calibration
  • IPM - Intelligent Power Management system
  • Selectable units of measurement
  • Battery or AC operation
  • Same housing size for all capacities
  • Accuracy: 0.5% of full scale 1 digit
  • Sampling rate: 30 readings/sec
  • Safe overload: 150% of capacity
  • Battery life: 30 hours of continuous operation
  • Weight: 0.7 lbs (0.3 kg)
  • Environmental requirements: 5 - 45 deg. C, <96% humidity (non-condensation)
  • CE mark
    @

<< The MG is compatible with all Mark-10 force measurement test stands. It is shown here in a wire crimp pull testing application, mounted to an ES30 with optional items: digital travel display, wire terminal grip, and dual roller grip.

 


 

>> Series MG force gauges are supplied in a cushioned carrying case with AC adapter, battery, hook, flat, user's manual, and NIST-traceable certificate of calibration.

@ @ Included Accessories @
Model Capacity x resolution Hook Coupling Flat
MG012 0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V G1028 - G1035
MG025 0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 110V
MG05 0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 110V
MG2 2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 110V
MG5 5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 110V
MG10 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V
MG20 20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 110V
MG50 50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 110V G1038 G1039
MG100 100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N, 110V
MG200 200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 110V
MG500 500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 110V G1035 G1037 G1036

For 220V operation add suffix E to model number. Example: MG50E

@

Model Ø A B C Thread
MG012-MG200 0.200 [5.8] 0.19 [4.8] 0.35 [8.9] #10-32
MG500 0.375 [9.5] 0.44 [11.2] 0.68 [17.3] 5/16-18

@

@

Motorized Test Stand

The ESM Motorized Force Measurement Test Stand is a versatile and precise testing solution for most compression and tensile testing applications up to 200 lb. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.

Speed is adjustable in up and down directions and a remote control unit provides added safety during testing. Other features include a manual fine adjustment knob and a stepper motor that prevents speed variation with load, making testing precise and repeatable. Use this test stand with any Mark-10 force gauge and grips to create a complete testing solution.

Motorized Tension / Compression Test Stand
  • Maximum force: 200 lb [1kN]
  • Maximum travel: 13" [330 mm]
  • Speed range: 0.5-13 in/min [13-330 mm/min]
  • Speed accuracy: ?% of setting, ?% variation with load
  • Remote control console with a 3' [1 M] cable
  • Universal power supply: 80-250 VAC
  • Manual travel knob
  • Mounting holes for bench mounting
  • Removable base plate with 25 #10-32 threaded holes for fixture mounting
  • Base may be removed for alternative mounting
  • CE mark

@
OPTIONAL EQUIPMENT
  • A wide range of force gauges and gripping fixtures
  • Digital travel display >>
    6" [152 mm] travel, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection
  • Limit switch kit <<
    Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001" [0.03 mm].
 
  • Overload protection module
    Protects the force gauge against accidental overloads during motorized tests. Adjustable from 20 - 110% of gauge's capacity. Compatible with all Mark-10 force gauges with outputs.
  • Set point cable
    Stops test stand travel at programmable high and low set points for tension and compression forces, programmed on a compatible force gauge.
  • Column extensions >>
    Available in 6", 12", 24", and custom lengths
  • Custom speed ranges
    Speeds can be modified to as slow as 0.02 in/min [0.5 mm/min] or as fast as 45 in/min [1143 mm/min]. Note that in some cases, the maximum force will be affected. Contact Mark-10 for complete details.
  • Competitor force gauge mounting kits available
 
PC CONNECTION GUIDE

The diagram below depicts the cables and adapter needed to output force and travel data from a

Mark-10 system to a PC. Please contact us for ordering information

 


@

Model Description
ESME Test stand, motorized, 200 lb, 220 V
ESM001 Digital travel display, 6" x 0.0005 (150 mm x 0.01)
ESM002 Limit switch kit for ESM
ESM003-1 Column extension for ESM/ES30, 6"
ESM003-2 Column extension for ESM/ES30, 12"
ESM003-3 Column extension for ESM/ES30, 24"
11-1042 Overload protection module, gauge to test stand
09-1090 Cable, set point, gauge to test stand
 

The ES30 is supplied with a tool kit, extension rod, small hook, medium hook, #10-32 coupler, and 2" dia. compression plate.
@

@


Excellent Technology Co.
Hong Kong: Tel. (852) 2691 3821    Fax. (852) 2900 2980
Email: LabSupplyhk@Gmail.com

China: Tel. (86) 150 1799 2655   Fax. (86) 755 3360 9662
Email: etchk.China@Gmail.com